Stucco by the competition rescued in Arlington,Virginia

Stucco by the competition rescued in
              Arlington,Virginia New flashing is put on right

All the flashing is removed from the addition, including over the windows, doors, and every horizontal and diagonal tudor board.

New flashing is put on right.Note the flashing is angled down away from the house.

.
The new flashing is sealed to the substrate with
              tape. big ugly gob of caulk around every panel

The new flashing is sealed to the substrate with tape.

For some reason there is a big ugly gob of caulk around every panel.

caulking is cut off of every panel with a sharp
              knife. The color was mixed in the flex con mix in a
              garbage can

The caulking is cut off of every panel with a sharp knife.

We measured our mix of flex con and water half and half. The color was mixed in the flex con mix in a garbage can.

Heaters allow work to proceed in
              sub freezing temperatures tent puffs out

Life under the big tent, like they say in the circus. Heaters allow work to proceed in sub freezing temperatures.

The tent puffs out when filled with hot air.

The color finish coat is rubbed
              with a rubber float The finish matches the addition Mr.
              Mason did years ago

The color finish coat is rubbed with a rubber float.

The finish matches the addition Mr. Mason did years ago.

backward flashing water funnel

I have to say something about backward flashing. Maybe the people that did this will read what I have to say and stop doing it. This flashing is angled back toward the house, forming a water trough. This is on the hardy siding gable on the addition we are working on.

Where does the water go ? The water runs off the higher trough to the lower trough and into the gap in between. This water funnel is over the stucco and directly over a window. This isn't home improvement, this is home destruction.