New house in
Takoma Park, MD
for Smith Design/Construction
Steps re -coated in Takoma Park A thin coat is troweled on in Takoma Park
Steps re -coated with a rich mix (low in sand) and plenty of Flex-con in the mortar. A thin coat is troweled on and rubbed with a rubber float as it sets up.
Design is marked off and taped with masking tape Color cement finish from the house is troweled on over the tape
Design is marked off and taped with masking tape. Color cement finish from the house is troweled on over the tape.
A sand float finish provides a rough surface for good traction Tape is pulled off revealing design
Finish is rubbed with a float. A sand float finish provides a rough surface for good traction. Tape is pulled off revealing design.The design is not only decorative, but provides improved traction.
A view of the back of the house Brown coat on blue board inside. Finish will be colored plaster
A view of the back of the house. Inside plaster:
Brown coat on blue board inside. Finish will be colored plaster. Please check back to see the inside finished. You may have seen some of our colored plaster before.